|
|
Feedwater heater design
Holčapek, Josef ; Tomáš,, Zdeněk (referee) ; Skála, Zdeněk (advisor)
This diploma thesis deals with the design of a feedwater heater. The aim of the work is to perform thermal, hydraulic and stress analysis. A preliminary technical documentation is also part of this work. The first part contains a summary of basic types of heat exchangers and processes of heat transfer. The main part is focused on thermal analysis to determine the main parameters of the heat exchanger. Next part is followed up by hydraulic analysis to determine the pressure drop of the heating water. After that is created design of heat exchanger with stress analysis of the proposed wall thicknesses of the shell, water chambers and tubesheet. Achieved results are summarized and evaluated at the end of the diploma thesis.
|
|
|
Calculations of steam condensers
Mifek, Roman ; Kilkovský, Bohuslav (referee) ; Jegla, Zdeněk (advisor)
This thesis deals with the calculation procedures for determining the heat transfer coefficient for steam condensers. The first section provides a basic overview for industrial steam condensers and possible procedure for selecting the appropriate type of tube condenser. The next section describes the types of condensation and equations for determining the heat transfer coefficient for various geometries of tubular condensers. In the final section there is performed practical calculation of condenser in Maple software using the above relations. The results obtained in this calculation are compared with the results obtained by professional computational software Chemcad and HTRI.
|
|
|
Air-cooled condenser
Kloda, Michal ; Jaroslav, Sinecký (referee) ; Pospíšil, Jiří (advisor)
The Master’s thesis dealing with air-cooled condensers is split into four sections. The first section shows an overview of air cooling, introduction into air-cooled condensers of A-frame shape and finned tubes. The second section deals with heat transfer on the steam side and deals with trapped incondensables on the steam side of ACC. The third section deals with heat transfer on the air side, shows a brief overview of fans and selected problems on the air side. In the last section the simplified thedmodynamic calculation of air-cooled condenser is shown.
|
|
|
Use of Renewable Energy Sources for Water Recovery
Patera, Jan ; Vojtek, Martin (referee) ; Baxant, Petr (advisor)
The bachelor's thesis deals with a summary of the basic theory for obtaining water from air humidity and it‘s following treatment in order to meet the hygienic regulations of drinking water. It presents the basic principles usable for obtaining water from the air, also presents the basic principles, including a basic overview of existing equipment for obtaining water from the air. It defines ideal conditions for obtaining water using atmospheric water generators. In a specific locality is determined a proposal for the water yield with energy performance during the year. Furthermore, the work deals with the use of renewable resources in obtaining water and the possibility of its subsequent treatment.
|
|
|
Hygrothermal processes in walls of wooden houses
Veselá, Lucie ; Vlach, František (referee) ; Bečkovský, David (advisor)
The diploma thesis deals with the thermal-humidity stress of the wooden wall. The work is focused on the connection of the wall to the base structure of the building. Three details were chosen. The work was focused on detail with the most common structure of an external wall used in the Czech Republic on the composition with a supporting structure made of KVH columns, which are filled with mineral insulation. This construction is covered with plate elements. The insulation from the exterior is made of ETICS with expanded polystyrene thermal insulation. This detail was assessed in the software. To compare the results calculated by real-time software, an experimental model was made, which was subjected to experimental measurements. Part of the diploma thesis is a comparison of detail stress under different boundary design conditions, with or without anchoring.
|
|
|
Economy and ecology of biomass utilization
Plíšek, Petr ; Špiláček, Michal (referee) ; Pospíšil, Jiří (advisor)
This bachelor thesis deals with an economic and environmental contexts of biomass utilization. The first part focuses on the description of the nature and manner of use of biomass. Another part is focused on economic aspects related to biomass. A necessity in the processing a particular energy source is its ecological problems, that is the third chapter. The last part is devoted to the design condensing heat exchanger and its output relative to the fuel wetness content, and boiler output with a condensing exchanger depending on the combustion products cooling temperature.
|
|
|
Utilization of absorption systems in the heating systems
Vidlák, David ; Špiláček, Michal (referee) ; Pospíšil, Jiří (advisor)
Main goal of this work is familiarization with basic features of absorption heat pumps and it’s growing importance on the market. In the first part of the work there is a research for clarifying facts associated with such pumps. In the introduction there are descriptions of basic information from the field of heating industry and its connections to our systems. Next there is a brief analysis of price changes in electricity and heat in the last five years. Main part of the analytical section is a description of the used absorption system. Second part of the work is focused on the calculation of the absorption system itself. First there is calculated internal and external part of the device according to the parameters from GE Power s.r.o. After this step there are parametric studies based on changes of key parameters of the default device for a demonstration of the behavior of a heating pump. In the end of the work there is a integration of the unit into the heating cycle for variations including flue gas condenser and using a cooling water from the turbine condenser.
|
|
|
Designing of a hot water heater
Zdražil, Pavel ; Frömel, Zdeněk (referee) ; Baláš, Marek (advisor)
This thesis processes design of hot water heater. It was done thermal, hydraulic and basic strength calculations in the work and from their outcomes was set up a design of heat exchanger, which was afterwards modelled and drawn. In the beginning of the work is reader introduced to heat exchanger types and characteristics and also to its thermal processes. Then the work continues with thermal design of the heat exchanger, where the most important outcome is heat transfer surface with other geometric parameters, followed by hydraulic design, where pressure loss on water side was calculated. The calculations are finished up by basic strength design, calculating thickness of shell and tube walls. The thesis is ended with evaluation of computed design and description of its basic features.
|
|
| |
|
|
Evaluation of methods for determining an air humidity in building constructions
Nogová, Tereza ; Šuhajda, Karel (referee) ; Žák, Antonín (advisor)
This thesis compares the methods for the determination of air and moisture condensation in the construction. There are descriptions of the various methods and formulas for measuring humidity and methods for the calculation of condensation in building structures. The practical part describes the development of a method for verifying the condensation of moisture in construction. Parts of this work are the materials and methods for the development of the humidity sensor. There were used two methods – capacitive and resistive for measuring moisture condensation. In the conclusion is the evaluation of the humidity sensor and compares the results of individual measurements.
|
guest ::
